Facebook Twitter Google+ YouTube Flickr 500px
See My Reviews

Canon EOS 80D Review

Dustin Abbott

May 19th, 2016

No Paper Tiger

Canon is what you might call a “conservative innovator”. I read a lot of virtual ink spilled over a lack of innovation on Canon’s part with people lamenting all the ways where Canon is falling behind. And truth be told, whenever Canon and one of its competitors releases a camera body at a similar time the Canon is rarely the winner on spec. But where Canon typically excels is in delivering a fully functional product, and, with what innovations it does bring (and they are more than what you might think), they are usually fully realized. My experience is that Canon usually delivers cameras that show better in real world use than they do in a press release. And I can think of no better illustration of this principle than the new Canon EOS 80D APS-C (crop sensor) camera.

I’ll be honest: I was more excited about the new Sony a6300 when it was announced at roughly the same time. I needed a new video rig for one of my many responsibilities (in this case for videoing events for my religious organization). The a6300 specced out as the far more capable video rig in many ways (most notably with both 4K video as well as 120fps 1080P shooting). But the closer I got to the final decision (I had a both kits priced out by a supplier), the more the pendulum began to swing towards the Canon 80D. I liked what I was reading about it, and the allure of the tried and true ergonomics, battery life, and lens ecosystem eventually led me to place the order for the 80D. Was is the right choice? Read on to find out.

If you would prefer to “watch on” instead, you can see my video review of the Canon 80D here:

Build and Ergonomics

I’ve now spent almost two months with the 80D, but it felt familiar within minutes. That’s one of the advantages of staying within the Canon ecosystem. Canon has traditionally done a very good job with camera ergonomics and the 80D is no exception. The one thing that will be missed by some coming from a 7D or the 5D range will be the thumb stick which can be a great asset, particularly when selecting focus points. This has been absent from the xxD range for some time, though, so it’s loss will not be noted by those coming from a 60D or 70D (and certainly not if you are upgrading from a Rebel/xxxD body). The ergonomics are very similar to that of the 70D body, but with a few notable exceptions.

The view from the left side reveals a definite redesign in the connectivity department. There are now three flaps covering ports rather than two, with the remote shutter release moved to its own area near the bottom of the camera. This is to make room for the addition of a 3.5mm headphone jack for monitoring audio next to the microphone input. This is a very welcome addition for anyone serious about doing video work. The HDMI (mini) port and USB ports have reversed position top and bottom compared to the 70D. One other new addition is the NFC symbol that signifies that the 80D now supports the “tap” function of Near Field Communications along with traditional Wi-Fi.

The rear view is essentially identical other than a redesign of the shape of the Q, Playback, and Trash buttons, which are now all circular rather than contoured. I suppose they are slightly easier to feel by touch, but I had scarcely noticed the difference in regular use. The rear wheel continues to be not quite as good/smooth as the one on the full frame bodies, though the circular rocker panel that surrounds the SET button has a much better feel – more definite and less spongy.

The right side looks identical save for two tiny exposed screw heads on the 80D that aren’t there on the 70D.

The top view is similar in many ways but with a few additions. The top LCD screen is now on a slightly raised portion of the top shell, which might make the primary four buttons there (AF, Drive, ISO, and Metering Mode) easier to find by feel. The On/OFF switch is in the same position on the left side, but now the Mode wheel is packed with a few new options, namely two Custom Function positions where the 70D had one and the addition of a Creative Filters option.

Other than a slight redesign of the lens release button the front view is virtually similar.

I found that the 80D felt lighter than the 70D though the difference is tiny (730g vs 755g – the 80D is 1.61 lbs). For that reason it felt slightly more “plasticky” to me, though that’s not really the case. The grip continues to feel pretty much perfect and fits my medium/large hands well. Canon claims that the weather sealing is fairly robust on this line, and I see no reason to doubt it. I’ve never had an issue with the 70D in adverse weather and don’t expect it from the 80D, either.  My 70D still looks like new (as you can tell in these pics) after nearly two years of use.

One of the nice advantages of having such a similar design is that a number of accessories for the 70D will continue to work with the 80D, from battery grips to underwater housings and so on. Accessories for new cameras tend to come at a price premium, while existing accessories have seen the typical price drop after having been on the market for a while.  If you already have a battery grip for the 70D (or some other accessory), you may be able to avoid some extra costs in upgrading.

Like the 70D the 80D has an extremely useful articulating touchscreen LCD that serves as an ergonomic treat. The screen is bright and responsive to touch, and the articulating screen is incredibly useful. I’ve owned the last three generations of the xxD line, and the articulating screen has been one of their best features. It is incredibly handy for both video and stills use, and I severely miss it when I use a camera without it (which, at the moment, includes all of Canon’s full frame offerings). The touchscreen nature of the LCD makes it incredibly useful for everything from controls to playback to selecting focus points. When combined with Canon’s excellent DPAF (more on that in a moment) using the camera in Live View mode is now a delight when it used to be a nightmare on most of Canon’s bodies.

The 80D ships with a new battery, the LP-E6n. This seems to be Canon’s new battery of choice for new camera releases (including the 7DII and 1DxII). It has [very] slightly more capacity, but the key seems to be its ability to deliver voltage in a different way that allows for slightly better performance (burst rate, for example). The nice thing here is that the camera also continues to be compatible with the older LP-E6 battery packs too, so if you have some of those you can continue to use them (with perhaps a very slight performance hit in a few scenarios). You are also going to want to get the fastest SDXC card you can, as the 80D continues to have a single SD card slot but is pumping a lot more data through the pipeline because of the significantly larger file sizes. You will observe some slowdown in the buffer if you cheap out on the card. Note that the 80D battery life is excellent, and this is one area where the mirrorless competitors (like the a6300) are really lagging behind. Expect to get 1000+ shots on a regular basis on a single battery charge.

One other physical difference is in the viewfinder, which is now pretty fantastic. The 80D’s pentaprism viewfinder has expanded to 100% coverage with a magnification of .95x. That, combined with a wide variety of choices for overlays results in a viewfinder that is a real pleasure to use.  It should be noted that during tracking the appropriate focus points will light up, which helps give you direct feedback on the tracking.

Canon’s menus continue to be logical and easy to navigate, and the addition of the touch screen makes that all the easier. The 80D contains considerably more depth in its menus due to having much more capabilities than the previous generation.

A new kit lens debuted with the 80D – the Canon EF-S 18-135 f/3.5-5.6 IS USM.  It is an interesting lens, and I spent some time with it and reviewed it here.

There are a number of other upgrades that I’ll try to touch on, but the two major ones are found “under the hood” in a drastically improved focus system and a number of strong improvements in image quality.

New Autofocus System

While Canon is certainly not averse to recycling focus systems (the 70D inherited a slightly tweaked version of the 7D’s AF), the 80D launches with a completely new autofocus system never before seen in a Canon camera. The number of AF points has more than doubled from the 19 points on the 70D to 45 on the 80D, all of which are the more sensitive cross type points. That broad spread of focus points means that portrait photographers will find it easy to compose how they like while still having access to highly sensitive, accurate AF points.

But it is more than just more AF points; the 80D’s AF system has a number of other important upgrades. Let’s take a look at them:

New APS-C Low Light King?

One of the features that Canon is touting about the new 80D is the improved sensitivity of the center focus point. Canon claims sensitivity is now good down to -3 EV (compared to -.5 for the 70D). The EOS 6D had a similar claim when it came to market, and after years of using the camera I can attest to the usefulness of that hyper sensitive center focus point which means that there are few lighting conditions that the camera cannot lock focus in (-3 EV is essentially the equivalent of moonlight).

I did a comparison between the 80D, the 70D, the EOS M3, and the full frame 6D. I used the EF 50mm f/1.8 STM lens for the comparison. The settings for the test were fairly extreme: the camera metered at 1/8th second at ISO 12,800 and f/1.8 (pretty dark). The 70D and M3 both hunted…and hunted, and then returned a red (can’t focus) symbol. This was true of the 70D in either Live View (DPAF or Contrast AF) mode or typical Phase Detect (viewfinder) AF.

The 80D returned a mixed bag. It was able to focus in Live View (DPAF) mode, and focus results were accurate. Using only that sensitive center point, I then tried Phase Detect (Viewfinder) focus. I was surprised to find that the camera only hunted without locking. At this point I wondered if my scenario was not too extreme, so I mounted the 6D.

I know my trusty 6D, and wasn’t really surprised that after focus and then a slight readjustment (about a second to second and a half) it locked focus. I did it again. Both results were accurately focused.

I went back to the 80D to give it another shot, but got the same result.  The full frame 6D is still the king of low light focus. Over the course of the review I found this scenario repeated several times. The 80D is undoubtedly better than the previous generation 70D in this regard (by a good margin), but not yet at the full frame standard. Considering that the specs suggest that the 80D should be on par with the 6D I would say that Canon didn’t quite deliver on this promise.

Improved Tracking?

The Canon 80D has made a number of improvements to its tracking system. The AF points now cover more of the frame, making it easy to keep a focus point on your subject. There is a fourth focus mode added to the AF system, and that is a large zone (left/center/right). You can also choose the smaller zones (nine active point grouping), individual focus points, or where the camera selects the focus point with all points active. How does all of this add up in tracking?

Using Phase Detect (viewfinder) AF, I had no issues with tracking a subject (particularly one moving towards the camera). In one sequence of my son running full tilt towards me I took 47 frames (in around 6 seconds according to the time stamp) I didn’t find any photos really missed. I used the new 18-135mm f/3.5-5.6 IS USM at 135mm (216mm) equivalent, and by the end of the sequence only about a third of him fit in the frame. I’ve shot similar segments in testing a number of lenses with excellent results across the board and a wide number of lenses.

I shot a lot of sequences of my dog, primarily with her moving rapidly chasing a ball across the frame. Some sequences were excellent, while in others the results were less consistent. I was encouraged to find that while some sequences started off without anything any focus the AF system acquired the target during the burst and kept her in focus throughout the remainder.

Switching to Contrast AF (Live View) I wanted to test Canon’s claim to enhanced tracking in Live View mode (be sure to switch to AF Servo from One Shot in the Q menu!). I had fairly poor results when using all points + face tracking mode, but selecting the center group and then using the touchscreen to select my son produced better results overall, though I had a section in the middle of the sequence when the tracking strayed to the background and stayed there until he got closer to the camera. It then picked him back up and did a great job tracking over the final third of the 34 shots in that sequence (also in about 7 seconds, which suggests the frame rate drops a bit in this scenario).

I can’t imagine why someone would prefer the Live View tracking mode, but it certainly is an improvement over the 70D. More importantly the AF Servo tracking in viewfinder mode is very effective. This camera is now more attractive to those who want all around camera that is very effective at sports or wildlife, too.

Use with 1.4x Extender (f/8 AF on All Points)

Those of us who own the excellent EF 100-400mm f/4.5-5.6L IS II USM or similar lenses were delighted to hear that not only would the 80D enable autofocus at f/8 on the center point (as a number of other bodies like the 5D MKIII or the 7D MKII had allowed), but would allow f/8 AF on 27 AF points (think the three groups of nine across the middle of the 45 AF points). This is very impressive. How does it pan out in real life?

Mostly good, but some not-so-good thrown in. First of all, if you own the MK II of Canon’s 1.4x extender, know that AF will work at f/8, but only on the center point. You must have the 1.4x III Extender to unlock the full potential of autofocusing at all points. Secondly, my Kenko 1.4x teleconverter that works fine on the Canon 70D (and other bodies) no longer works at all on the 80D. It is now about 4 years old. Some change that Canon has made to the focus algorithm has “bricked” it. Kenko will invariably release a new version that does work (and perhaps a newer release of it already does), but this does highlight the peril of purchasing third party accessories. Kenko might be wise to adopt the USB Dock model that Sigma and then Tamron have employed of “future-proofing” their equipment and allowing for firmware updates when Canon does something like this.

How about the autofocus itself? That really depends on what focus mode you select. Using a single AF point (particularly the center one) results in quite good results. The focus with the 100-400L II even at 400mm (560mm with the 1.4x) produced fast, accurate results. Here’s a shot of the moon and a crop at 560mm (896mm FF equivalent).

Individually selecting other points worked quite well, too, if not with the absolute certainty of the center point. Results are less promising in other modes, though. Selecting a zone of focus points does work, though autofocus speed is definitely slowed a bit and there is a greater tendency for the AF to “pulse” a bit before settling on focus. I also found in some settings that the focus button needed to be depressed more than once before the AF would “wake up” and do what you wanted.

It should be noted that the mode that allows you to select either the whole left group, center group, or right group (large zone) is not available. You can select the left group of nine, center group of nine, right group of nine, individual points in those groups, or all AF points (the 27 available). The latter choice produces the least desirable results, in my opinion, with the most hunting and poor behavior, though in some settings it seemed to work fine. The bad news is that doing sophisticated AF work (like bird in flight tracking) may produce more frustrations than you desire. Less demanding situations should prove quite acceptable, though.

It’s nice to have as an option, of course, and there are many situations where it is useful, but my recommendation continues to be that the best use of lenses is within their native focal lengths.  The image quality remains very good (at least with the 100-400L II), and one nice bonus is that the lens with the extender becomes almost a macro lens…save with the biggest working distance, ever.  Check out the image of the screw and nut, here, and that is not even quite maximum magnification.

There are a number of ways where the AF system is notably improved over that of the 70D, and for typical use I’ve been really delighted with its performance. In time I’m sure that I’ll better maximize its potential, but suffice it say that there is much more depth in the AF system to be explored and further pads the credentials of the 80D as one of the most versatile cameras, well, ever. It seems that Canon has done a good job delivering on the potential of the new upgrades. While not perfect, there are some notable improvements across the board.

DPAF Tracking

The 70D has been on the top cameras used by YouTubers in large part because of Canon’s DPAF (Dual Pixel Autofocus) technology that pioneered with it. DPAF revolutionized the versatility of Live View (Contrast AF) autofocus, with vastly improved focus speed and also highly functional video servo autofocus (the camera continues to focus during video acquisition.) One of the key upgrades to the 80D’s DPAF functionality is that now the camera’s tracking ability in DPAF mode (stills or video) is radically improved.  I ran a series of tests to examine the improvements of tracking in video mode.

If you will watch this video, you can see the clear advantage that the 80D has over the 70D in this regard.

The bottom line is that the 80D is now my go to video camera for my own YouTube channel. I can shoot videos at wide apertures and the face tracking is perfect…and I mean perfect. The focus on my face as I move about (I’m fairly animated as a presenter) remains impeccable and my job is much, much easier as a result. If you are a YouTuber, the 80D might well be the best choice for you. While the 80D doesn’t have as many video modes as some of the other competitors (no 4K), the video quality and color rendition is exceptional. In head to head comparisons the Canon 80D video looks more natural and less “pumped up” than, say, the a6300.

Sensor Improvements

The 80D has received a new 24.2MP sensor that has a nice resolution bump over the 70D’s 20.2MP sensor. This is to me a bit of a sweet spot for sensors, allowing for more pixels to be packed on the subject but with the ability to further improve some important things like dynamic ranges and high ISO performance. The 80D now uses Canon’s Digic 6 processor rather than the Digic 5+, though unlike the 7DMKII it has only one processor rather than two.

I’ll break down the major improvements in a moment, but there are a few other niceties that are a part of the package. The shutter lag is improved to 60ms from 65ms (70D), meaning that the camera is more responsive. While the frame rate remains similar at 7FPS, the camera is moving much more information (nearly 20%) due to the higher MP count. Canon has managed to improve the buffer, too, from 65 JPEGS (70D) to 110 JPEGs before the buffer fills, or 25 RAW images rather than the 16 RAW images from the 70D. These are significant improvements that will make the camera more attractive to sports/wildlife/event shooters.

Another key improvement that we saw with the 7DMKII was the flicker detection and timing to help when shooting under lights that cycle (sodium lights are notorious for this). I’ve seen a lot of unevenness from this phenomenon in my event shooting in the past. The 80D adopts this technology, and, when engaged, will help avoid the flicker and will give you more even results. This is going to be a big deal to some shooters.

The 80D also adds a new AWB mode which will aim to produce a white priority balance even under tungsten lights (no warm/yellow look). You may want to remember to toggle in and out of this if you want a warmer look to your images, but for those that want a consistent white balance in changing lighting it works quite well. Another advantage for event/sports/wedding photographers.

Another great feature is the built in intervalometer that allows for time lapses to be shot in camera without any other accessory. One more tool in the arsenal.

The biggest improvements come to the image quality itself, though, which is improved in every measurable metric.

Great Looking Images

The 80D produces some of the finest images of any APS-C camera, which great detail, accurate color rendition, and excellent dynamic range. The larger megapixel count results in images that are noticeably more detailed, and the larger images also give you more latitude for cropping (which, frankly may be a better option than using a teleconverter in some situations).

Dynamic Range

The early buzz around the 80D is a significant improvement to its dynamic range at base ISO. Expanded dynamic range allows you more leverage in balancing the exposure when you have both bright areas and shadow areas in the same shot. My experience in the past says that Canon has had better success with this in the shadow recovery area than it has with highlight recovery.

I used Canon’s EF-S 24mm f/2.8 STM lens for the three APS-C cameras I have on hand: the Canon 80D, 70D, and the EOS M3. The 70D has a smaller 20MP sensor, but the EOS M3 has a similarly sized 24.2MP sensor. I shot the same scene in rapid succession, using bracket exposures ranging from -3EV to +3EV. My goal was then to bring up the shadows in the underexposed images and see what shadow recovery was like.  My recommendation is to watch this video that will allow you to interactively see just what I’m talking about here.

The 80D is definitely the top camera here for shadow recovery. I took the 3 stop underexposed image and brought it up two stops then used Lightroom’s shadow recovery slider at 100% along with the highlight recovery at -100%. I then tweaked the whites and blacks a bit to see if I could produce a credible image. The end result gave me a lot of confidence. The shadows are still nice and inky without any hint of noise. The weathered boards along the front of the old barn show nice detail and no color noise.  You can see both the original underexposed image along with what playing with the sliders produced in the gallery below.

The image from the 70D is noticeably inferior. I used the exact same values but with a very different end result. The shadows are full of noise, and there is color noise on the various textures that simply isn’t there with the 80D. The same weathered boards along the front are discolored with a lot of green color noise. The fine details are noticeably better with the 80D’s image.  Here is a look at the two:

The EOS M3 has a similarly sized sensor, but it is clear that the 80D is packing some improvements. The EOS M3 will only autobracket 2 stops, but the light was falling somewhat so the histogram is still about equal at two stops. I did manually shoot a frame with the same settings as the other two cameras, but it was a bit more underexposed. I used slightly less extreme recovery figures to get a similar look, but even so I could see the superiority of the 80D’s sensor. The noise levels are a bit less extreme in the shadow area, but still clearly behind those of the 80D. Likewise there is more discoloration in the boards on front of the barn.

I wasn’t particularly impressed with my results to recover any of the three stop overexposed images. Blown out highlights at that extreme just aren’t coming back. I could create credible images save the skies, but didn’t notice a big difference between any of the cameras.

My recommendation: if you want to get a balanced exposure out of one frame, slightly underexpose (a stop or even two) and you will have a nice sky along with the ability to cleanly recover shadow information with the 80D.

High ISO Findings

Canon has been steadily improving the performance of its cameras at high ISO settings, and that is apparent here. Don’t expect anything earth shattering, but there is clearly an improvement over the 70D though still not at the level of the full frame 6D (which has been the Canon king for a while when it comes to clean images at higher ISOs). The 6D lacks in some areas (AF!!), but its sensor is top notch.

When comparing the images from the 70D, M3, and 80D, the latter wins for having the finest grain and the least amount of color banding. Most importantly is that you can push up into ISO 6400 territory, for example, and get quite good results.  Here is a comparison between the 70D and the 80D at ISO 12,800. (80D on left)

The 80D clearly has the cleaner image, with less color banding and a finer grain/noise pattern.  This image also reveals another tip:  Adobe has revised the color profile for the 80D to a more neutral look that lacks the typical stronger red saturation of Canon bodies that you are familiar with.  It is more accurate, but if you are very accustomed to (and like) the usual Canon color, you may find the color output a bit flat.  You may want to make a custom profile in the camera that boosts the red saturation a bit to give you the look you are accustomed to.

I shot an event at a school all at ISO 1000 with very clean results.  I used the new Sigma 50-100mm f/1.8 ART lens (review here) and was happy with how everything turned out.  Here’s a few of samples:

Finally, in the interest of meeting the internet requirement of a cat picture in every lens/camera review, here’s a cat at ISO 5000.  I shot this with the 18-135mm USM lens (not the world’s sharpest), but there is still a nice amount of detail and a clean look overall.

All in all the 80D has made great strides all around in the image quality department and sports what I believe to be the current standard for APS-C cameras.

Video

Many of the improvements to the 80D are video centric, which makes it more surprising that Canon elected to not include 4K video support. That, in my mind, would have make the camera an instant home run and helped bring the doubters into the fold. But no, the camera lacks 4K support, and also continues to not offer clean HDMI out. So, in an absolute sense, the 80D is still not a “pro” video camera, but it is a great video camera for those looking to vlog, run a YouTube channel, or just capture great looking video (with all of the enhancements of the 80D’s improved sensor!)

One of the 80D’s great advantages is the built in ergonomics of the camera. The Sony a6300, for example doesn’t have the touchscreen, so selecting the focus point is much more clunky. With the 80D you can simply touch where you want the camera to focus, and it will produce a nice focus pull. I found that shooting in 1080/60p mode (the 70D topped out at 30fps at 1080p) allowed me even more control over those focus throws and produced really smooth transitions. That 1080/60p is obviously a vast improvement for when you record action as well.  I shot this whole segment with the 80D and was really pleased with the result.

The 70D was a good video performer, but one weak area was in its moire suppression (which it didn’t suppress very well at all!). The 80D is significantly better, and in this brief video I demonstrate the difference between the two.

Canon offers a new HDR video mode on the 80D, where the camera will try to reduce highlight clipping in high contrast situations. The new time lapse functionality can also be accessed in video mode to produce time lapse movies in camera.

The aforementioned headphone jack is an important addition here, and even the microphone jack has been re-positioned to a more logical point on the camera body.

There are a few optional accessories that Canon has pioneered with the 80D to further its credentials as a video rig. The first is a directional stereo microphone, the DM-E1. There are obviously a number of third party alternatives, and I haven’t spotted any specific thing to point to as a selling point over alternatives from Rode, for example, but it is still nice to see Canon attempting to fill this void. I’ve owned the DM-100 from Canon for camcorders for years, and it has always performed well for me.

More interesting, however, is the new powerzoom accessory – the PZ-E1.  This attaches the lens and enables silent electronic zoom control both physically and remotely via the Canon app (this is the most interesting aspect of it!). The power zoom also gives you options for setting the zoom speed, enabling much greater flexibility for video capture and making the lens operate very similarly to a camcorder lens. Right now the only lens that is compatible is the new EF-S 18-135mm IS USM lens that debuted with the 80D as a new kit lens. I reviewed that lens here. It will be interesting to see which lenses in the future are also designed for use with this accessory. While it may be a niche item that doesn’t appeal to everyone, it does certainly give some additional (potential) functionality for owners of the lens.

One other primary shortcoming is that the 80D continues to have the 29:59 minute limit, after which the camera will automatically stop recording and will need to be manually restarted.  This is similar to all other DSLRs and is basically the result of a quirky EU law that imposes additional duties/tariffs on video cameras.  That limit is imposed to bypass those tariffs. On the plus side video recording will continue to that point without being interrupted at the 4 GB mark like previous generations.

While the Canon 80D doesn’t have the absolute video specs of a few competitors, I feel like the 80D’s video features are well implemented.  The footage itself looks great, very clean and with accurate color.  I’m very happy with it as a video rig.  Since acquiring it the 80D has been my go-to rig for my YouTube channel, and I’m getting a lot of feedback about the clean, sharp results I’m getting right out of camera (I find that using the Landscape color profile produces enough saturation and sharpness for me to forego color grading, at least for my purposes.)

Conclusions

While there were a number of people that looked at the announcement of the 80D and said, “yawn”, I have yet to hear from anyone who has used the camera who didn’t love it. It is more camera in the field than it is on paper, and the key word that I and others are using of it is versatility. It just seems to be pretty much good at everything. It handles well, has great image quality, and is generally a joy to shoot with. The upgraded AF system makes it a viable competitor to the 7DII, though that camera should probably still be the ultimate choice for sports or wildlife shooters. But the Canon EOS 80D is the jack of all trades, good enough at everything to make many owners very happy. It lacks some of the advanced video features of the competitors, but implements the video features it does have very well and produces footage better than its specs might suggest. Canon’s DPAF technology is maturing nicely, and the tracking performance in video is excellent. There are few reasons to not recommend the 80D to anyone looking for an all-round excellent camera. I would be delighted if the 6DMKII was essentially this camera with a full frame sensor…now that would be fun!

Pros:

  • Extremely versatile camera that is pretty good at everything
  • Improved 24.2MP sensor with great image quality and exceptionally good dynamic range
  • Improved AF system with 45 cross-type AF points
  • Up to 27 AF points available at max f/8 aperture
  • Improved tracking in both viewfinder AF and Live View DPAF
  • Highly sensitive center point in low light conditions (Canon claims to -3 EV)
  • 100% viewfinder coverage
  • Flicker detection and white priority AWB helps sports and event shooters
  • Headphone jack, more video modes, and better moire performance
  • Faster shutter and bigger max buffer improves action performance
  • More connectivity (addition of NFC)
  • Articulating touchscreen is a treat to use
  • Fantastic ergonomics make for a great shooting experience
  • Ability to use 70D accessories, battery grip, and older LP-E6 batteries

Cons:

  • Lacks the advanced video specs of the competition
  • Some new features (f/8 focus with teleconverter, -3 EV focus) don’t work as well as expected
  • No 4K video
  • Single SD card slot
  • High ISO performance didn’t jump as much as the dynamic range
  • Can take more time for the buffer to clear than what you expect (faster cards improve performance)

Gear Used:

Canon EOS 80D
EF-S 24mm f/2.8 STM Lens
Canon EF-S 18-135mm f/3.5-5.6 IS USM Lens
EF 50mm f/1.8 STM Lens
Sigma 50-100mm f/1.8 DC HSM ART
Adobe Lightroom CC Software for Mac and Windows (Boxed Version)
Adobe Photoshop Creative Cloud 1-Year Subscription
Alien Skin Exposure X (Use Code “dustinabbott” to get 10% anything and everything)

Purchasing your gear through B&H and these links helps fund this website and keeps the articles coming. Thank you for your support.

B&H Logo

Great News! I can now offer a 5% discount on all purchases at Amplis Foto, Canada’s Leading Photographic Supplier. Please enter discount code: AMPLIS52016DA in your cart. It is good for everything in your cart, and is stackable with other coupons, too! It will take 5% off your entire order! Proceeds go towards keeping this site going and providing you with new reviews!

Check me out on:

Google+: | Facebook: | Twitter: | Flickr: | 500px: | Sign Up for My Newsletter :

DISCLAIMER: This article and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. As an Amazon Associate I earn from qualifying purchases.

Canon EF-S 18-135mm f/3.5-5.6 IS USM Review

Dustin Abbott

May 4th, 2016

Batman’s Lens of Choice?

As soon as I took this lens out of the box I knew that it represented a departure for Canon in more than just its internal focus system. The lens explores a whole new look for Canon’s budget glass, with a black on black finish without the adornment of any contrasting colors (no silver ring). It has more of a matte finish than any lenses from Canon I’ve seen, and even the texture of the lens barrel is a slightly soft touch, minutely powdered texture. There is a faint contrast ring of finish between the zoom and focus rings in an even blacker color but with a shinier finish. If Batman owned a lens, it would be the Canon EF-S 18-135mm f/3.5-5.6 IS USM.  It looks like a stealth bomber.

Check me out onGoogle+: | Facebook: | Twitter: | Flickr: | 500px: | Sign Up for My Newsletter :

Want to Watch your Review?  Click below:

In similar fashion the switches are also stealthy. They are smaller than typical and are lower profile. You definitely won’t be accidentally engaging them, but I see the potential downside that they could also be hard to engage if you were wearing gloves or had thick/blunt fingers.  They can be a little hard to find by feel alone.  A little lower down there is a zoom lock (it can only be engaged in the fully retracted position), but the lens (out of the box, at least), shows zero inclination towards zoom creep. A zoom lock is always a welcome addition, but I doubt you will be using it very often.

There are no distance markings on the lens much like all of the STM lenses. What the lens does have is a brand new mounting/contact area for use with Canon’s new power zoom accessory (more on this below).

The lens has a nicely compact form for its impressive zoom range, though don’t expect something tiny. It is about 3.78”/96mm long, but the barrel will extend roughly another 2 inches/5cm when zoomed out to 135mm. The zoom action is nice and smooth. The lens weighs in at 1.13lb/515g, so, while not a featherweight, it should be light enough to not be a dealbreaker for the vast majority of photographers.  The zoom action is very smooth and there is no play or wobble in the lens barrel.

The lens has a very common 67mm front filter thread, one shared with many other lenses. It has several rounded aperture blades that do a fairly decent job of retaining a circular shape when stopped down.

While the overall build of the lens feels quite good (though obviously not professional grade), it should be noted that the lens makes no concessions towards any kind of weather sealing or moisture resistance and so users should use some caution when shooting in inclement weather. This is one area where the Tamron superzoom lenses (even the cheap Tamron 18-200mm VC that I reviewed) have the upper hand.

Some of the third party lens makers are taking a hit for moving production to facilities in other countries on some of their lenses, but it is worth noting that other than the high end Canon lenses it has been a while since I’ve seen one made in Japan (my EF 35mm f/2 IS was made in Japan). An easy way to tell is that Canon tends to put “Made in Japan” on the bodies of the lenses made in Japan, while they hide the outsourced info in black on black on the rear mount. If you look carefully, you will often see, “Made in Malaysia” or “Made in Taiwan”. This lens is the latter. I don’t say that to be prejudicial towards these countries but rather to level the playing field; it isn’t just third party manufacturers that have been forced to move some of their manufacturing out of Japan. Economic realities often mean that fabrication costs within Japan are too high for these lower margin lenses but doesn’t necessarily mean that quality is lower or that sample variation is higher.

In typical Canon fashion for its consumer level lenses neither a lens hood nor a protective case or pouch is included.

Nano USM – Very Impressive

Equally stealthy is the new Nano USM focus motor. Using the new 80D I just found that focus was just suddenly there. Almost no sound and very little focus time. No sense of elements moving (admittedly the elements aren’t huge in this lens anyway!) but rather an almost complete lack of sensory feedback at all. It just focuses…faster than any STM system I have used but even more quietly.  Canon claims that the focus speed on the telephoto end is more than 4x!! faster than the previous generation STM version of the lens, and I don’t doubt it.  It is fast, utterly quiet, and without any drama in focus at all. Full time manual focus override is available, and while I can tell that it must be a focus by wire system (once again there isn’t any kind of sensory feel of moving anything) the lag issue that often plagues STM focus  isn’t there. While I still prefer the tactile response of a good manual focus lenses’ focus ring, this is definitely an improvement over STM.

The lens is equally impressive in tracking mode. Using Phase Detect (viewfinder) AF, I had no issues with tracking a subject (particularly one moving towards the camera). In one sequence of my son running full tilt towards me I took 47 frames (in around 6 seconds according to the time stamp) I didn’t find any photos really missed.  This ought to make some moms and dads very happy when they try to keep up with their kids! The success rate wasn’t quite as high tracking in Live View mode on the new 80D, but frankly I can’t imagine why someone would prefer this over viewfinder AF for tracking action.  If you would like to see the whole tracking sequence, watch the video review here.

My first impression says, “STM who?” Methinks that STM may have been just a transition phase to this clearly more advanced technology.  I liked Nano USM more and more as I used it.

Image Quality

The flexibility of such a focal range and its 7.5x zoom ratio is extremely desirable. The 28.8-216mm full frame equivalent focal range is one that makes me jealous, and the applications for this focal range are essentially limitless. Here’s a scene at 18mm and then 135mm.

The lens has 16 elements in 12 groups, which is the same as the previous generation STM lens.  It is safe to say that if you are familiar with the previous generation lens then you have a pretty good idea of what to expect from this lens.

Unfortunately the lens is not exempt from some chromatic aberrations, with both green and purple fringing showing the respective areas of high contrast. While the lens is too new to have a profile yet in Lightroom/ACR, I did find simply checking Lightroom’s “Remove Chromatic Aberration” box was all that was really needed to nicely clear up the CA in most cases, though some purple fringing persisted in more extreme instances.

Reviewing lenses like this can be somewhat difficult for me as my sense of what qualifies as good resolution in a lens like this is skewed by being able to use all of the best new gear…including a number of recent lenses that have set the bar ever higher in their respective fields. A consumer grade zoom lens is not going to be able to compete with those lenses. The STM version of the lens (the second of Canon’s three lenses in this focal length for the EF-S mount) made a nice evolutionary step forward in optical performance from the first generation. This lens is pretty similar to the previous generation lens. It compares favorably with other superzoom lenses and almost matches my favorite EF-S zoom – the EF-S 15-85mm IS USM.  The lens fairly handily betters the image quality at comparable settings from the Tamron 16-300 VC lens that I reviewed a year or so ago and should be seriously considered for those looking for a travel lens, particularly when purchased in a kit.

The lens performance is quite strong in the center of the frame and even into the mid-frame, though corner performance is softer and far less contrasty. Stopping down helps some, but don’t expect the extreme corners to ever be exceptional.

The EF-S 24mm f/2.8 pancake lens turns in a stronger extreme corner performance than this lens does even stopped down to f/8. Images from the EF-S 18-135mm look nice and detailed at standard viewing sizes but much less impressive at a pixel level.

When used on the longer end the lens is capable of making backgrounds nicely disappear and the bokeh is fairly decent. The bokeh itself is not exceptional, but neither is it terrible. There is some activity with bokeh highlight circles, but no concentric circles (onion bokeh). The inner line of the circles is somewhat pronounced, with translates into some harder edges in defocused regions than what is optimal. Still, on the long end of the zoom range you are able to throw backgrounds out of focus quite nicely, particularly if you get fairly close to your subject.

The lens exhibits fairly strong barrel distortion on the wide end (the center bulges out), while there is some pincushion distortion on the long end, though it seems a little less extreme. This is rarely a strength for this type of lens. It should be noted that you can enable distortion correction in the camera body for some newer cameras, which will help those of you that shoot JPEGs.

The lens does vignette (particularly on the wide end), but at 18mm f/3.5 (worst case scenario) the vignette doesn’t quite reach two stops in the most extreme corners, so we’ll call this a mild vignette.

When pointed at the sun the lens does veil somewhat and will produce a few ghosting effects. Stopping down seems to help with this, though the ghost effects (blobs of color) that remain tend to be more defined. The lens produces surprisingly nice sunstars when stopped down.

The lens has a minimum focus distance of 15.4”/39cm and at 135mm turns out an impressive (and highly useful) .28x maximum magnification.

Most of these optical flaws are part and parcel for zoom lenses with big focal ranges, and none of this particular lens “sins” are extreme. It performs as one might expect and is capable of producing nice images that will satisfy most of its customers.  Check out the image gallery here to see many more samples!

New Tricks

While we’ve already discussed the new Nano USM technology, it is worth repeating again. The focus speed is a LOT faster than the STM version of the lens. Canon states that is about 2.5x faster on the wide end and as much as 4.3x on the long end. This is very impressive, and so is the actual focus performance of the lens. It is both fast and accurate and I look forward to Canon implementing this focus system in other lenses moving ahead.

The speed and quality of the Nano USM AF system are put to the test by the burst rate of the new 80D. I found that when using traditional viewfinder AF in AF Servo mode that tracking results are quite excellent, particularly when the subject is moving roughly towards the camera. Side to side tracking is more complex and has more variables.

While the focus by wire system will never be my favorite for manual focusing (I like to manually focus at times, so this matters to me), it is somewhat less annoying than STM.

I was interested in seeing how the lens would react when used via adapter on the Canon EOS M3 that I happen to own. How would Nano USM translate to the mirrorless body? All of the native mount EF-M lenses from Canon have utilized STM. The snappy focus translated very well, and, while the lens didn’t focus as quickly on the M3 as a DLSR (no lens does!) it did focus quickly and accurately. I found it interesting (and unusual) that the lens actually focused more quickly on the long end than it did the wide. Usually it is the other way around. On a practical level, while the EF-S 18-135mm is larger than optimal for the lightweight M3 body, the low overall weight of the lens made it a reasonable fit there and certainly of some use if you happened to also own one of the M series bodies. As of yet there is no comparable lens from Canon, though Tamron does make a very nice 18-200mm lens in an EF-M mount that I review here.  Here’s a nice shot from this combination:

The lens not only has an extremely effective image stabilizer, but also touts a new dynamic IS setting specifically for video production. This showed its worth by producing amazingly steady handheld moving pan shots. Not quite Glidecam stuff, but better than what I’ve seen from handheld video. You can see a brief clip from it in the video review.

The stabilizer for still works perfectly. It comes on and off without anything noticeably happening and operates so quietly that I can barely hear the inner workings with my ear pressed right up to the barrel. Canon claims four stops of compensation. I was able to easily nail this shot at 1/6th shutter speed at 135mm (216mm FF equivalent). Very impressive.

The other new trick for the EF-S 18-135mm is compatibility with Canon’s new PZ-E1 power zoom accessory. This attaches the lens and enables silent electronic zoom control both physically and remotely via the Canon app. The power zoom also gives you options for setting the zoom speed, enabling much greater flexibility for video capture and making the lens operate very similarly to a camcorder lens. It will be interesting to see which lenses in the future are also designed for use with this accessory. While it may be a niche item that doesn’t appeal to everyone, it does certainly give some additional (potential) functionality for owners of the lens.

Powerzoom 2 Powerzoom

This lens is available in a kit with the new Canon EOS 80D, but, interestingly, there is no discount for buying it that way (for now). When that changes (and it surely will), expect this lens to become an excellent value when purchased in kit with a camera body. Right now it retails for $599.00, which is a $50 premium over the previous generation STM version. Anyone that has used both lenses would probably happily pay that premium, as the new focus system is a vast improvement and really makes the lens a pleasure to use. Its new focus is fast enough to compare with lenses costing much, much more. Canon has a new edge. I would have liked to see more of a step forward in the optical performance (this is really just a lateral move), but the image quality is “good enough” for most people and can certainly produce some nice images.

Conclusion

There is a lot to like about Canon’s newest lens. I’m blown away by the new focus system and feel like it represents a better, more effective focus system than any of Canon’s consumer grade lenses have received before. It is almost eerily fast and silent, and has proven quiet effective in both tracking and stills focus performance.  This is going to help a lot of people keep up with their active children or grandchildren. I feel that Nano USM represents a quantum leap forward for an AF system that is equally effective in both stills and video shooting. I only wish that the image quality had taken a similar leap forward. It feels like it could be better, though it is good enough to meet the needs of many shooters and is competitive with similar lenses. This is a great travel lens, though I might wish that the great looking new lens body included some attempt at weather resistance. This may seem like quibbling, but I have reviewed several competing lenses from Tamron that do include moisture resistance.

Canon also persists in not including a lens hood. Old news, I know, but I’m so accustomed to everyone else including one that this seems remarkably petty in a lens that costs essentially $600. Tamron’s 18-200mm f/3.5-6.3 Di II VC lens costs $199 and includes one. Such is the reality of Canon’s consumer grade lenses, but all of this aside I do feel that the Canon EF-S 18-135mm f/3.5-5.6 IS USM is a lens that is going to make a lot of people happy, and the new Nano USM technology is extremely exciting. I look forward to its implementation in other new lenses in the future. The Canon EF-S 18-135mm USM is well worth considering if you are looking for a travel lens or a single lens solution.  Who knows – you and Batman may travel with the same lens…

Pros:

  • Nano USM is the real deal – a vast improvement over STM while retaining its strengths
  • Excellent image stabilizer performance
  • Dynamic IS mode does seem to help video stability
  • Nice new design language
  • Good tracking performance means the lens is a great fit for those wanting to capture family moments
  • Very strong maximum magnification figure
  • Compatibility with the new Power Zoom accessory.

Cons:

  • Image quality hasn’t improved over previous generation
  • No lens hood
  • No weather sealing makes it less appealing for travel
  • Many alternatives are cheaper or have a larger focal range

 

Gear Used:

Canon EOS 80D
Canon EOS M3 Mirrorless Body
Canon EF-S 18-135mm f/3.5-5.6 IS USM Lens
Adobe Lightroom CC Software for Mac and Windows (Boxed Version)
Adobe Photoshop Creative Cloud 1-Year Subscription
Alien Skin Exposure X (Use Code “dustinabbott” to get 10% anything and everything)

Purchasing your gear through B&H and these links helps fund this website and keeps the articles coming. Thank you for your support.

B&H Logo

Great News! I can now offer a 5% discount on all purchases at Amplis Foto, Canada’s Leading Photographic Supplier. Please enter discount code: AMPLIS52016DA in your cart. It is good for everything in your cart, and is stackable with other coupons, too! It will take 5% off your entire order! Proceeds go towards keeping this site going and providing you with new reviews!

Check me out on:

Google+: | Facebook: | Twitter: | Flickr: | 500px: | Sign Up for My Newsletter :

DISCLAIMER: This article and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. As an Amazon Associate I earn from qualifying purchases.

Canon EF-S 18-135mm f/3.5-5.6 IS USM Image Gallery

Dustin Abbott

May 4th, 2016

Multi-Purpose and High Speed

Canon has released a new lens to be sold in kit with the brand new Canon 80D that is packing a number of new tricks up its nearly matte black sleeves.  The Canon EF-S 18-135mm f/3.5-5.6 IS USM features a new Nano USM focus system that blows away anything we’ve seen from Canon in their consumer zooms before.  It really is impressive.  The image quality is largely the same as the previous generation, but it is good enough to satisfy most users of the lens.  Below I will share a gallery of images from the lens and some of the lens itself.  You can read my full review here or watch the  video review below:

Images of the Canon EF-S 18-135mm f/3.5-5.6 IS USM

Images by the Canon EF-S 18-135mm f/3.5-5.6 IS USM


Gear Used:

Canon EOS 80D
Canon EOS M3 Mirrorless Body
Canon EF-S 18-135mm f/3.5-5.6 IS USM Lens
Adobe Lightroom CC Software for Mac and Windows (Boxed Version)
Adobe Photoshop Creative Cloud 1-Year Subscription
Alien Skin Exposure X (Use Code “dustinabbott” to get 10% anything and everything)

Purchasing your gear through B&H and these links helps fund this website and keeps the articles coming. Thank you for your support.

B&H Logo

Great News! I can now offer a 5% discount on all purchases at Amplis Foto, Canada’s Leading Photographic Supplier. Please enter discount code: AMPLIS52016DA in your cart. It is good for everything in your cart, and is stackable with other coupons, too! It will take 5% off your entire order! Proceeds go towards keeping this site going and providing you with new reviews!

Check me out on:

Google+: | Facebook: | Twitter: | Flickr: | 500px: | Sign Up for My Newsletter :

DISCLAIMER: This article and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. As an Amazon Associate I earn from qualifying purchases.

Canon EF-S 24mm f/2.8 STM Lens Review

Dustin Abbott

April 28th, 2016

Check me out onGoogle+: | Facebook: | Twitter: | Flickr: | 500px: | Sign Up for My Newsletter :

More Like This, Please!

I’ve lamented Canon’s lack of support for their mirrorless EF-M mount, but the truth of the matter is their crop sensor EF-S mount has received an equal amount of disdain. Until the launch of this lens there was only one EF-S prime lens; the EF-S 60mm f/2.8 Macro lens (an excellent lens, by the way). There is still only one zoom lens without a variable aperture (the EF-S 17-55mm f/2.8 IS), but that lens is frankly a bit embarrassed optically by the Sigma 18-35mm f/1.8 ART lens. The release of the EF-S 24mm f/2.8 STM is thus very welcome. Who wouldn’t want an affordable, sharp prime with great maximum magnification, an awesome form factor, and a nicely affordable price? 

Want to watch your review?  Click on the video below:

I’ve owned the EF 40mm f/2.8 STM lens since its release, and while I don’t use it often, I’m in no rush to part with it because it is generally excellent and so nicely compact! Canon’s first full frame pancake lens was and is a true winner, and performs great double duty on either Canon’s crop sensor (APS-C) bodies along with the mirrorless EOS M systems. The EF-S 24mm is, in essence, a repackaging of that lens specifically for crop sensor cameras but with a few nice little upgrades.

Because I typically think in full frame focal lengths, I think of 24mm as being a fairly wide angle of view. But this isn’t a full frame lens; it is for crop sensors, so you must multiply that 24mm by the Canon APS-C crop factor of 1.6x, resulting in an effective focal length of 38.4mm, or very similar to the angle of view of the 40mm STM on a full frame camera. Don’t think of this lens as a wide angle lens but rather one that provides a nice, slightly wider “normal” field of view.

Build Quality and Handling:

When the 40mm STM “pancake” was released I praised the build quality for feeling a cut above other budget lenses like, say, the 50mm f/1.8 II. While still largely engineered plastics around a metal core, the lens felt reasonably dense and well engineered. That lens has proven durable over the past four years (???) and has served me well. The 24 STM seems similarly well constructed and feels a bit less “plasticky” than the since updated 50mm f/1.8 STM.

The lens is nicely compact and scarcely takes up more room than your camera mount cap. Its diameter is nearly three times its length as the lens itself is less than an inch long (.9”/22.8mm long). By contrast it is 2.69”/68.2mm around. The weight of the EF-S 24mm is equally feathery at only 4.41oz/125g. These pancake lenses really redefine the portability of DSLRs and [almost] turn them into compact cameras. The compact nature of the lens also makes it a natural fit for the Canon EOS M3 mirrorless body via the EF adapter, and even with the adapter the EF-S 24mm seems like a native mount lens. We’ll examine its functionality in that application in this review.

The lens has an optical formula comprised of 6 elements in five groups. It has a reasonably common (and also small/affordable 52mm filter size). The aperture iris has seven rounded blades that do a pretty fair job of keeping the aperture round as the lens is stepped down (none of that old 50mm f/1.8 hexagon nonsense!).

The lens barrel is very small, so Canon has kept things simple. There is an AF ON/OFF switch and the focus ring…that’s it (and there was barely room for that!). The focus ring is small, as expected, and like most STM lenses has relatively little resistance (or feel when manually focusing, for that matter). This is not an STM strength.

What is a strength for the EF-S 24mm is its ability to focus down very closely and provide an excellent maximum magnification figure. It can focus down to only 6.3”/160mm and has a maximum magnification of .27x, a figure that puts it among the top non-macro lenses in Canon’s staple. This handily beats the 40 STM and its .18x magnification and nearly reaches the level of the class leading Tamron 45mm f/1.8 VC’s .29x. This is an extremely useful feature and further extends the functionality of the lens as a general purpose, stay-on-the-camera option.

This close focus ability also allows the lens to shine in producing bokeh. I noted that the lens has a very nice transition to defocus though without that extreme creaminess and drawing that the higher end lenses produce. Still, if you get close to your subject you will be able to produce a nice amount of bokeh…on a budget!

Autofocus Observations

The 24 STM utilizes Canon’s “stepping motor” (STM) focus motor. The EF 40mm STM lens pioneered this new (at the time) approach to autofocus. While speed is always a factor with autofocus motors, STM technology is more about the way focus is achieved. Specifically, “stepping” technology is about smoothness in focus, and smooth transitions from one focus point to another. Its major application is in video capture when AF Servo focus can be used to achieve smooth video focus without hunting or pulsing. A lens with STM used with, say, the new 80D (or a number of other APS-C bodies with Video AF Servo functionality) will even do smooth, natural “focus pulls” where extreme focus changes are made from a foreground to a background subject or vice-versa. STM motors also tend to be quieter, particularly when compared to the older micro-motors used in many of Canon’s lower end (non USM) lenses.

The lens focuses quickly and accurately. I was happy with the focus speed in either viewfinder AF or via DPAF on the Canon 80D body that was my primary review camera. It seemed to me that this was one of the speedier implementations of STM that I have used.

Image Quality

With such a compact lens one might be tempted to think that optical excellence is out of the question, but I quickly discovered this was not the case.  Finally, we have a Canon branded crop sensor lens that can compete optically with the Sigma 18-35mm f/1.8 ART (the Sigma still has a bit of an optical edge, but doesn’t focus as consistently as this lens). The lens is sharp across the frame and has nice contrast. Stopping down increases contrast and resolution a bit (particularly in the extreme edges of the frame), but you can mostly use stopping down to apertures like f/5.6 or f/8 for the purpose of extending the depth of field rather than out of a need to increase sharpness. A bit of post processing helps make images really sparkle out of this lens. The only sharper EF-S mount lens from Canon that I’m aware of is the excellent EF-S 60mm f/2.8 1:1 Macro USM lens.  Here are a couple of wide open images with a crop to give you a sense of performance in the center and somewhat off center of the frame.

I was reviewing the new EF-S 18-135mm f/3.5-5.6 IS USM lens at the same time with its new Nano-USM focus system. While I LOVE the focus system of this lens, it optically cannot compete with the little EF-S 24mm prime.

Chromatic aberrations are well controlled with the lens. I saw a hint of green fringing in a few situations, but so low as to be essentially negligible for field use. This wide open crop from bare branches against a bright sky are a perfect storm for CA, but as you can see there is little to see here.

The lens does have a bit of barrel distortion that is easily corrected (but exceeds that of the 40mm STM). The only real objectionable image quality issue is a fairly strong vignette at f/2.8 that tops 2 stops in the extreme corners. Stopping down to f/4 virtually eliminates the issue for field use, though. Here is a before/after with the standard Adobe Profile applied.

Flare resistance is good but not exceptional.  Wide open there is a bit of a greenish ghosting close to the light source.

By f/5.6 this has disappeared but at f/11 there is a bit of a prism effect around the light source – not enough to be an issue, however.  For most situations you won’t be adversely affected by shooting into the sun.  The seven bladed aperture produces a decent if not exceptional sunburst when stopped down to f/11.

The lens is capable of producing quite a bit of bokeh when close to the subject due to the close focus ability. The bokeh quality itself is not superb. The inner line of bokeh higlights is quite pronounced, meaning that there are more hard edges than what I would like in the out of focus regions and less “cream”. There is also some busyness within the circle as well as some green fringing.

In some situations the bokeh can be a bit busy for my tastes, and it is here that the lens shows its budget nature.  The image below is a case in point.

At the same time I recognize that bokeh is a highly subjective metric, and some of you may prefer a little more “activity” in the defocused region. I have some shots where I’m very pleased with the bokeh, so I think it may be a matter of learning the lens and shooting to its strengths.  Here is a little gallery of “bokeh” images.

The lens has a 7 bladed rounded aperture, and retains a circular shape when stopped down fairly well.

I am pleased with the color rendition and contrast. Neither is Zeiss level, but the box for a Zeiss lens seems to cost as much as this lens!

The lens also works very well as a video option. I actually purchased it specifically for a kit I was building for my responsibilities within my religious organization. We needed some video capture equipment, and I chose the EF-S 24mm to use on Canon 80D and 70D bodies for that purpose. I recently shot a whole video segment for a review/demonstration of some cycling lights with the EF-S 24mm and found it an excellent tool. You can see that video here:

The lens tracks well, has nice color rendition and even good bokeh on closer shots, and when using the 80D at 1080P/60 I was able to get very nice focus pulls by simply clicking the screen and allowing the camera/lens to do the focus pulls and then slowing them down even further in post to have really excellent results. The high sharpness at f/2.8 proved an asset, and the high magnification is exceptionally useful when wanting to shoot close, detailed shots. When used in conjunction with DPAF or similar video tracking in my EOS M3 the EF-S 24mm is a highly useful tool for a videographer. I don’t find STM focus as beneficial when manually focusing (performing linear, accurate manual focus transitions is difficult due to the ‘focus by wire’ system), but the excellent AF tracking and focus (particularly on the 80D) renders that moot part.

I mentioned the M3, and it worth mentioning that the EF-S 24mm is a fantastic option for the M series of cameras via the adapter. Many non-native mount lenses aren’t great fits on Canon’s mirrorless bodies. The need for the adapter extends the length of all lenses, making many lenses even more prone towards being front heavy and killing the balance. The EF-S 24mm joins the EF 40mm f/2.8 STM and 50mm f/1.8 STM lenses as being perhaps the most natural non-EF-M lenses to use on the system. Due to the STM focus system and light, compact nature of these lenses they perform much like native mount lenses in both size and operation. The EF-S 24mm provides an excellent “normal” angle of view on the M3, and the focus is quick and accurate via the EF adapter. The very short length of the EF-S 24mm allows the resulting lens/body combination to be small and light, fulfilling the mandate of the system (at least for me). This only extends the value of this lens, much like it has the value of the 40mm STM to me. That lens has seen more duty on my M bodies than it has on my DSLRs in recent years. Here’s a little gallery of images taken on the M3 with the lens.

In Conclusion

There were two things that initially kept me from acquiring and/or reviewing this lens. First is the fact that I don’t shoot crop cameras all that often. When I do, it tends to be more with a small, mirrorless body that I’ve chosen for its compact size. I’ve owned the excellent EF-M 22mm f/2 STM for years and so I didn’t really need this lens. The advent of doing more and more video on crop sensor bodies like the 70D/80D is really what led me to the lens. Using it has convinced me of its value, which would be even higher if I didn’t already have a large kit of lenses and camera bodies.

It is rare that I refer to a lens as a “must own”, but I see no reason for a person that shoots crop sensor bodies (Rebel Series, xxxD, xxD, or 7D/7DII) to not own this lens. This is perhaps even truer if you own Canon’s diminutive SL1 body. The Canon EF-S 24mm f/2.8 STM has it all. Extremely compact size, a fairly large maximum aperture of f/2.8, great sharpness at all aperture values, fast focus, and a great, highly useful maximum magnification value of .27x. The bokeh is pretty nice (if a bit busy in some situations), distortion and chromatic aberrations fairly well controlled, and even the flare resistance is quite good. There is some vignette wide open, but this can be easily compensated for either in the camera body or in post. And at $149 in the US, the highly reasonable price removes the only barrier that might cause me to hesitate to recommend the lens. It will only work on crop sensor (APS-C) cameras, but the fact that it can perform excellent double duty on one of Canon’s EOS M bodies only extends its value. The field of view of this lens is on the wider end of “normal”, which means that it is an extremely versatile focal length that functions well as a general purpose lens. This is the kind of lens that Canon needs to produce more of…but I’ll be thankful for this one for now.

Pros:

  • Extremely compact lens
  • High sharpness even wide open
  • Quick, accurate autofocus
  • Smooth video AF focus via STM
  • Good contrast and color rendition
  • Chromatic aberrations well controlled
  • Great maximum magnification value
  • Very reasonable price

Cons:

  • Fairly strong vignette at f/2.8
  • Some ghosting in the bright sun
  • Bokeh can be a little busy in some situations

Gear Used:

Canon EOS 80D
Canon EOS M3 Mirrorless Body
EF-S 24mm f/2.8 STM Lens
Adobe Lightroom CC Software for Mac and Windows (Boxed Version)
Adobe Photoshop Creative Cloud 1-Year Subscription
Alien Skin Exposure X (Use Code “dustinabbott” to get 10% anything and everything)

Purchasing your gear through B&H and these links helps fund this website and keeps the articles coming. Thank you for your support.

B&H Logo

Great News! I can now offer a 5% discount on all purchases at Amplis Foto, Canada’s Leading Photographic Supplier. Please enter discount code: AMPLIS52016DA in your cart. It is good for everything in your cart, and is stackable with other coupons, too! It will take 5% off your entire order! Proceeds go towards keeping this site going and providing you with new reviews!

Check me out on:

Google+: | Facebook: | Twitter: | Flickr: | 500px: | Sign Up for My Newsletter :

DISCLAIMER: This article and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. As an Amazon Associate I earn from qualifying purchases.